Custom Lid and Base Boxes for Toys, Robots and Electronics

How to match paperboard, EVA and blister inserts to figurines, small robots and remote controls.

A figurine, a small robot and a remote control can all fit in a lid and base box, but they need different internal support. A suitable insert must hold the product in position, make it easy to remove and leave room for accessories.

This guide focuses on lid and base boxes for toys and electronics. It helps packaging buyers choose a practical box and insert combination before requesting a sample or quotation.

Quick answer: which insert should you consider?

Product Insert to consider Check during sampling
Figurine or collectible Paperboard tray for a simple, stable shape; EVA or a formed tray for delicate details Painted surfaces, projecting parts, removal points and display angle
Small robot EVA for a close fit, or a formed tray with separate accessory cavities Weight distribution, moving parts, accessory positions and lifting clearance
Remote control Paperboard for a straightforward layout; EVA or a formed tray for a more precise fit Buttons, edges, battery compartment, grip and removal space

These are starting points, not fixed rules. The final insert should be tested with the actual product and accessories inside the intended box.

Figurine packaging: support the shape without stressing details

Figurine supported by a folded paperboard insert inside an open lid and base box

A figurine may have a stable base but fragile hands, hair, tools or other projecting features. The insert should support stronger areas of the product without pressing against delicate or painted details.

A paperboard tray can work when the figurine is relatively light and has a simple footprint. An EVA insert can provide a closer fit for an irregular shape. A formed blister tray can create a shaped cavity when the presentation or packing method calls for it.

For a display-led project, check the figurine’s viewing angle as well as its fit. Buyers should also test whether a customer can lift it out without pulling on a fragile part.

Small robot packaging: plan the product and accessories together

Small robot and accessory fitted into separate EVA cavities in a lid and base box

Small robots often combine a main body with a controller, cable, charger or other components. Confirm the complete set before defining the box size. Adding an accessory cavity late can force a larger box or weaken the original layout.

EVA can help position a heavier or irregular robot securely. Paperboard may suit a simpler, lighter product. A formed tray can separate components into defined cavities. Whichever material you consider, check that the robot cannot shift into its accessories when the closed box is moved.

Leave clearance for moving parts and provide a safe point for lifting the product out. The insert should support the robot without relying on pressure against switches or delicate features.

Remote-control packaging: protect buttons and allow easy removal

Remote control recessed in a shallow fitted PET insert inside a lid and base box

A remote control usually has a long, narrow shape. Its buttons, edges and battery compartment affect how it should sit in the tray.

A folded paperboard tray may provide sufficient support for a simple retail or gift presentation. EVA can create a closer fit when movement or presentation is a concern. A formed tray may suit projects that need a precisely shaped cavity or a separate accessory position.

During sampling, check that the remote sits level, does not press against the lid and can be removed without pushing on its buttons.

What should you check in a packaging sample?

Packaging sample fit check for a product, accessories and custom insert

Test the box with production-equivalent products and the full accessory set. Confirm:

  1. The product fits without forced insertion.
  2. Delicate surfaces and projecting parts do not carry the product’s weight.
  3. The product stays in position when the closed box is handled.
  4. Accessories have defined positions and do not rub against the main product.
  5. Fingers can reach a safe lifting point.
  6. Buttons, switches and moving parts have enough clearance.
  7. The insert sits securely in the base.
  8. The lid closes without pressing on the product.
  9. The packed box presents the product at the intended angle.
  10. The packing steps are practical for the planned quantity.

The outer structure and insert should be reviewed as one packaging system. For general structure options, see our Lid & Base Boxes page. Our Custom Inserts page covers the wider range of insert materials and formats.

What should buyers send for a useful quotation?

To compare suitable structures, send the product type, photos, dimensions and weight. Include the number and size of accessories, your preferred box style, target quantity per design, insert preference, printing or finishing requirements, and target market or sales channel. A reference package or a photo showing the desired layout is also helpful.

QX Packs is a custom packaging manufacturer in Shenzhen, China, since 2004. We can review the product information and suggest a practical lid and base box and insert direction for sampling. MOQ is 1,000 pcs per design; 500 pcs can be reviewed case by case.

Send your project details through Contact Us or WhatsApp to request a packaging suggestion and quotation.

FAQ

Is EVA always the best insert for a small robot?

No. The choice depends on the robot’s weight, shape, surface, accessories and presentation requirements. A paperboard or formed tray may be more suitable for some layouts. Compare physical samples before approving the structure.

Can a paperboard tray hold a figurine securely?

It can for some lighter figurines with suitable support points. Figurines with fragile projections or unusual shapes need closer fit checks and may require a different tray design.

Should the box size be decided before the insert?

The product, accessories, insert and box size should be planned together. Setting the outer dimensions too early can leave insufficient space for secure support or make the finished box unnecessarily large.